1. Align racks on cross bars so they open toward you
2. (A) Pull strap under cross bars, (B) tuck, and (C) twist knob to tighten
3. Lock racks to cross bars 
4. Note – distance between your cross bars must accommodate binding hardware. No part of bindings should be caught in rack clamps.

‏‏‎ ‎

Using your roof rack:

1. Open both racks
2. Pair skis bottom to bottom and set them in the racks, with either tip pointed toward your taillights
3. Close both racks until they click down as far a possible
4. Lock racks to secure your skis

1. Insert rack in hitch (A), make sure hitch pin clicks into hitch pin hole (B)
2. Unlock tension knob with key (C)
3. Twist knob until really tight! (D)
4. Test rack stability (E). Repeat (D) if wobbly
5. Lock tension knob (F)

‏‏‎ ‎

Using your hitch rack:

1. Lift the handle on top of rack and swing the arms up 90 degrees
2. Lift and rest bike on the rack arms, handlebars on passenger side
3. For multiple bikes, rack them largest bike first, all oriented the same way
4. Using 3 straps, secure each bike’s top tube to the rack (x2) and to the seat tube (x1)
   

1. Swing hitch connection down until it clicks
2. Insert rack in hitch (A), make sure hitch pin clicks into hitch pin hole (B)
3. Unlock tension knob with key (C) 
4. Twist knob until really tight! (D)
5. Test rack stability (E) Repeat (D) if wobbly
6. Lock tension knob (F)

‏‏‎ ‎

Using your hitch rack:

1. Unfold trays (do not stand on trays!)
2. Stabilizer bars attached to rack can be removed and repositioned
3. Squeeze clamps toward knobs to release Stabilizer bars from rack
4. Place bike on rack, handle bars on passenger side
5. Secure wheels to trays with straps
6. Secure bike frame (top tube, down tube, seat tube) to rack with stabilizer bars
7. Tighten and lock all tension knobs to secure bike

1. Open cargo box, open all 4 clamps widely, then shut cargo box.
2. Lift and set box on roof, crossbars within the jaws of the open clamps
3. Open box, twist knobs to tighten all clamps until they click

‏‏‎ ‎

Using your cargo box:

1. Secure all equipment inside box using straps provided
2. Install while trunk/hatch is open to ensure proper placement
3. Do not put straps on outside of box
4. Do not exceed 80 mph