Shopping Cart
X
Product Vendor: Ibis Product Collections:

Ibis Hakka MX Ultegra Di2

Regular price

This product may be purchased online but is available only for in-store pickup.

Product Details
  • Summary
  • Components
  • Geometry
  • Bike Services

Summary

Frame

Drivetrain

Crank

Brakes

Wheels

If you've been passionate about the cyclocross scene for some time, chances are you've had a crush on the Hakkalugi at one time or another. While the Hakka MX's roots don't sprout up too from the Hakkalugi tree, it rebels against its forefather with geometry tweaks and updated standards that we're pretty sure you'll find infatuating. Straying away from cyclocross and delving further into offroad exploration, the Hakka MX embraces stiffness with 142 x 12mm thru-axles, as opposed to the 135mm dropouts of the past. It further stiffens things up with the new T47 bottom bracket, which combines the stiff shell of a PF30 with the tried-and-tested reliability of a threaded bottom bracket for a squeak-free hold while you ride. A wider range of crank diameter spindles can be used on the T47 bottom bracket without sacrificing bearing diameter and larger spindles forced in a standard diameter threaded shell. The bigger shell also yields larger contact areas between the tubes offering greater drivetrain rigidity. Rear, removable, fender mounts at the bottom of the seatstays and the rear of the bottom bracket shell will come in handy during a muddy gravel race, winter training, or commuting.

  • Frame Material: Carbon Fiber
  • Fork: ENVE CX
  • Fork Material: carbon fiber
  • Headset: Cane Creek 40-series
  • Shifters: Shimano Ultegra Di2
  • Front Derailleur: Shimano Ultegra Di2, R8050
  • Rear Derailleur: Shimano Ultegra Di2, R8050
  • Crankset: 50/34t, Shimano Ultegra FC-R8000
  • Bottom Bracket Wheels: Mfg T47 Outboard Threaded Bottom Bracket
  • Crank Arm Length: 172.5mm
  • Cassette: 11 x 34t Shimano Ultegra CS-HG800
  • Chain: Shimano XT/Ultegra CN-HG701 11-Speed
  • Brakeset: Shimano Ultegra Di2
  • Brake Type: [fork] post-mount, [frame] flat-mout
  • Rotors: Shimano Ultegra SM-RT800, 160mm
  • Handlebar: Easton EC70 AX Carbon
  • Handlebar: Drop 120mm
  • Handlebar: Width 44cm
  • Bar Tape: PRO classic bar tape
  • Stem: Zipp Service Course
  • Stem Length: 100mm
  • Saddle: Fi'zi:k Aliante R7
  • Seatpost: Zipp Service Course, 350mm, zero offset
  • Wheelset: [700c] Reynolds ATR 700 Carbon Disc Wheelset, tubeless, centerlock, [650b] Reynolds ATR 650 Carbon Disc Wheelset, tubeless, centerlock
  • Hubs: Reynolds Allroad Disc
  • Front Axle: 12 x 100mm thru axle
  • Rear Axle: 12 x 142mm thru axle
  • Tires: [700c] Zipp Tangente Speed, tubeless, [650b] WTB Byway Plus, tubeless
  • Tire Size: [700c] 700c x 28mm, [650b] 650b x 47mm
  • Recommended Use: Gravel

Components

Geometry

Bike Services

Don't forget! Every bike purchase comes with one free bike service within 90 days, 50% off all bike services within two years, and 50% of a bike fit of your choice! We have full-service bike shops at all our stores.

Prices are subject to change by level of difficulty. Prices listed do not include parts.

BIKE MAINTENANCE

Basic Tune  $95
  • Check/adjust hubs, BB, headset
  • True F+R wheels and adjust spoke tension by hand
  • Clean/adjust F+R derailleurs and F+R brakes
  • Lube chain and cable housing
  • Wipe down fork stanchion and lube with fork oil
  • Grease stanchion port if any
  • Clean rotors and sand uneven pads
  • Check and tighten all bolts to manufacturer spec (cranks, chain ring, pedals, stem, handle bar, bottle cage, seat post, saddle, brake levers, rotors)
Drive Train Cleaning
$85
  • Remove and clean chain, pedals, crankset, chain rings
  • Remove and clean BB, F+R derailleurs, cassette
  • Align rear derailleur hanger
  • Reinstall and adjust all above parts
  • Clean brake calipers
Major Tune
$170
Includes a Basic Tune and Drive Train Cleaning
Overhaul $280
Major Tune plus the following:
  • True/round/dish F+R wheels and re-tension spokes with tensiometer
  • Disassemble, lube, and reassemble F+R hubs
  • Disassemble, lube, and reassemble headset

 

BIKE BUILDS
Hourly Rate
$85/hour
New from box $120
Used from box $85
Pro Build $255

 

PROFESSIONAL BIKE FITTING (learn more).
Call your local store to schedule.
Basic Bike Fit (50% off with bike purchase) $150
Premium FIST Bike Fit (50% off with purchase of road race or tri bike) $250
Fit adjustment $45
Product Reviews